Browsing by Author "Haller, G."

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    BeamCal Instrumentation IC: Design, implementation and test results
    (IEEE, 2011) Abusleme Hoffman, Ángel Christian; Dragone, A.; Haller, G.; Wooley, B. A.
    The BeamCal detector, one of the calorimeters in the forward region of the International Linear Collider detector, will serve three purposes: ensure hermeticity of the detector for small polar angles, reduce the backscattering from pairs into the detector center, and provide a low-latency signal for beam diagnostics. The BeamCal specifications in terms of noise suppression, signal charge, pulse rate and occupancy pose unique challenges in the front-end and readout electronics design. The Bean - BeamCal Instrumentation IC - is a 32-channel front-end and readout IC that will address the BeamCal instrumentation requirements. By employing switched-capacitor filters and a slow reset-release technique, the Bean will process the signal charge at the International Linear Collider pulse rate. Each channel will have a 10-bit successive approximation analog-to-digital converter and digital memory for readout purposes. The Bean will also feature a fast feedback adder, capable of providing an 8-bit, low-latency output for beam diagnostic purposes. This work presents the design and characterization of the Bean prototype, a 3-channel IC that proves the principle of operation described.
  • No Thumbnail Available
    Item
    ECFA Detector R&D Panel, Review Report
    Abramowicz, H.; Abusleme Hoffman, Angel Christian; Afanaciev, K.; Aguilar, J.; Álvarez, E.; Bambade, P.; Bortko, L.; Bozovic-Jelisavcic, I.; Castro, E.; Chelkov, G.; Coca, C.; Daniluk, W.; Dragone, A.; Dumitru, L.; Elsener, K.; Emeliantchik, I.; Firu, E.; Fischer, J.; Fiutowski, T.; Ghenescu, V.; Gostkin, M.; Grzelak, G.; Haller, G.; Henschel, H.; Ignatenko, A.; Idzik, M.; Ito, K.; Kananov, S.; Kielar, E.; Kollowa, S.; Kotula, J.; Krumstein, Z.; Krupa, B.; Kulis, S.; Lange, W.; Levy, A.; Levy, I.; Linssen, L.; Lohmann, W.; Lukic, S.; Moron, J.; Moszczynski, A.; Nauenberg, U.; Neagu, A.; Novgorodova, O.; Nuiry, F.X.; Ohlerich, M.; Orlandea, M.; Oleinik, G.; Oliwa, K.; Olshevski, A.; Pandurovic, M.; Pawlik, B.; Preda, T.; Przyborowski, D.; Sato, Y.; Sadeh, I.; Sailer, A.; Schumm, B.; Schuwalow, S.; Schwartz, R.; Smiljanic, I.; Swientek, K.; Takubo, Y.; Teodorescu, E.; Wierba, W.; Yamamoto, H.; Zawiejski, L.; Zgura, T.S.; Zhang, J.
    Two special calorimeters are foreseen for the instrumentation of the very forward region of an ILC orCLIC detector; a luminometer (LumiCal) designed to measure the rate of low angle Bhabha scatteringevents with a precision better than 10−3 at the ILC and 10−2 at CLIC, and a low polar-angle calorimeter (BeamCal). The latter will be hit by a large amount of beamstrahlung remnants. The intensity and the spatial shape of these depositions will provide a fast luminosity estimate, as well as determination of beam parameters. The sensors of this calorimeter must be radiation-hard. Both devices will improve the e.m. hermeticity of the detector in the search for new particles. Finely segmented and very compact electromagnetic calorimeters will match these requirements. Due to the high occupancy, fast front-end electronics will be needed. Monte Carlo studies were performed to investigate the impact of beam-beam interactions and physics background processes on the luminosity measurement, and of beamstrahlung on the performance of BeamCal, as well as to optimise the design of both calorimeters. Dedicated sensors, front-end and ADC ASICs have been designed for the ILC and prototypes are available. Prototypes of sensor planes fully assembled with readout electronics have been studied in electron beams.
  • Thumbnail Image
    Item
    Mismatch of lateral field metal-oxide-metal capacitors in 180 nm CMOS process
    (INST ENGINEERING TECHNOLOGY-IET, 2012) Abusleme, A.; Dragone, A.; Haller, G.; Murmann, B.
    Metal-oxide-metal (MOM) capacitors represent an attractive alternative to metal-insulator-metal (MIM) capacitors in mixed-signal integrated circuits. Since they are made of metal lines, they can be integrated in standard CMOS processes, and tailored over a wide range of sizes. Mismatch data of MOM capacitors, however, is scarce and typically conservative. Presented is the design and the test results of a custom ADC that employs an array of 1024 MOM capacitors sized at 2 fF. Static performance metrics are presented and compared with those for an ADC based on MIM capacitors. Mismatch data is computed from the results.